Centro Natural Gas Conversion Kit Operations Instructions download pdf (Page 8)

L I G H T I N G

T H E G R I L L

Make Sure you have followed all the safety checks, procedures and instructions

indicated in the previous section, before attempting to light the grill.

Lighting The Main Burners

1. Always open the hood completely and always inspect the grill and burners to confirm

that all components are properly positioned before lighting the main burners.

2. Always confirm that all of the burner control knobs are in the OFF position before

opening the gas supply.

3. Slowly turn on the propane gas supply valve at the tank 1-2 turns.

4. Wait approximately 5 seconds before turning the CENTER burner Control knob to the

HIGH position by pushing down on the knob and turning it counter-clockwise.

This procedure allows pressure to stabilize, and prevents the flow limiting feature

from being activated.

5. Immediately press the Electronic Igniter. You will hear a continuous clicking sound as

the module generates a spark to the burner. The selected burner should light within

5 seconds. Light all remaining burners by pushing in and turning the corresponding

control knob, to the HIGH position. Each burner will automatically ignite.

W A R N I N G

Never stand with your head directly over the Barbecue when preparing

to light the main burners, to prevent possible bodily injury.

W A R N I N G

IF THE SELECTED BURNER DOES NOT LIGHT,

immediately turn the burner control knob and cylinder valve to the OFF

position, to prevent gas buildup. Wait five minutes for the gas to

clear and then repeat the preceding starting procedure. IF the burner will

not light when using the Ignitor, follow the match lighting instructions.

1 2 3 4 5 6 7 8 9 ... 32

No comments

Centro Natural Gas Conversion Kit Operations Instructions Page 8